|
|
Non-destructive testing of welds
Šaloun, Jan ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
This thesis describes non-destructive testing (NDT) of fusion welds of metals. There are five fundament methods of NDT discussed in the theoretical part – visual and magnetic particle inspection, ultrasonic, radiography and penetrant testing. Principles of methods, examining procedures and their evaluations are described. The methods are compared with each other. In the experimental part of the thesis two samples of welding joints were welded and tested by selected methods. To verify correctness of the indicated defects, metallographic samples were made. At the conclusion practical results are compared with theoretical statements.
|
|
|
Influence of input material on technology and production of deep drawn product
Černá, Monika ; Peterková, Eva (referee) ; Šulák, Ivo (advisor)
This bachelor thesis was elaborated in cooperation with company ITW Pronovia, s.r.o within the scope of the bachelor degree and presents an assessment of the effect of material properties and manufacturing technology of a deep-drawn product. In this work the mechanical and technological tests were carried out on the supplied material HT179. This material is further processed into a cartridge for an airbag deployment. During production many defects occurred, especially after cutting out the holes of deep-drawn product. The company established these defects as material property. Therefore it is necessary to evaluate the characteristics of different material sets.
|
|
|
Laser diode soldering
Straka, Michal ; Holík, Milan (referee) ; Stejskal, Petr (advisor)
This work deals with the laser diode soldering. The theoretical part summarizes general and acquired findings about soldering technology and materials that occur in this process. It also describes factors that affect the reliability of solder joints. It is closely focused to the shaping of the solder joint and structure of intermetallic layer. The practical part of this work is focused on the design of equipment for laser diode soldering and subsequent shaping of the samples. The quality of soldered joint is compared against the quality of joint created using re-flow technology - remelting in in-line smelter. The structure and thickness of the intermetallic layer, the number and shape of the voids in the solder joints are compared.
|
|
|
Controled crystallisation of aluminium alloys castings poured in shell moulds
Mašková, Lenka ; Střítecký, František (referee) ; Roučka, Jaromír (advisor)
The aim of this thesis is to verify a possibility of controlling the crystallisation of aluminium alloys poured in shell moulds in order to achieve directional solidification. For this purpose, new cooling plant has been designed and fabricated. Several sample castings were produced under different initial conditions. Based on the evaluation of measured temperatures, a numerical simulation of heat transfer was created using the ProCAST software. Finally, the sample castings were sectioned into specimens that were, subsequently, metallographically polished and the evaluation of their structure with respect to the amount and types of defects was performed.
|
|
|
Non-destructive testing of welds
Šaloun, Jan ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
This thesis describes non-destructive testing (NDT) of fusion welds of metals. There are five fundament methods of NDT discussed in the theoretical part – visual and magnetic particle inspection, ultrasonic, radiography and penetrant testing. Principles of methods, examining procedures and their evaluations are described. The methods are compared with each other. In the experimental part of the thesis two samples of welding joints were welded and tested by selected methods. To verify correctness of the indicated defects, metallographic samples were made. At the conclusion practical results are compared with theoretical statements.
|
|
|
Controled crystallisation of aluminium alloys castings poured in shell moulds
Mašková, Lenka ; Střítecký, František (referee) ; Roučka, Jaromír (advisor)
The aim of this thesis is to verify a possibility of controlling the crystallisation of aluminium alloys poured in shell moulds in order to achieve directional solidification. For this purpose, new cooling plant has been designed and fabricated. Several sample castings were produced under different initial conditions. Based on the evaluation of measured temperatures, a numerical simulation of heat transfer was created using the ProCAST software. Finally, the sample castings were sectioned into specimens that were, subsequently, metallographically polished and the evaluation of their structure with respect to the amount and types of defects was performed.
|
|
|
Laser diode soldering
Straka, Michal ; Holík, Milan (referee) ; Stejskal, Petr (advisor)
This work deals with the laser diode soldering. The theoretical part summarizes general and acquired findings about soldering technology and materials that occur in this process. It also describes factors that affect the reliability of solder joints. It is closely focused to the shaping of the solder joint and structure of intermetallic layer. The practical part of this work is focused on the design of equipment for laser diode soldering and subsequent shaping of the samples. The quality of soldered joint is compared against the quality of joint created using re-flow technology - remelting in in-line smelter. The structure and thickness of the intermetallic layer, the number and shape of the voids in the solder joints are compared.
|
|
|
Influence of input material on technology and production of deep drawn product
Černá, Monika ; Peterková, Eva (referee) ; Šulák, Ivo (advisor)
This bachelor thesis was elaborated in cooperation with company ITW Pronovia, s.r.o within the scope of the bachelor degree and presents an assessment of the effect of material properties and manufacturing technology of a deep-drawn product. In this work the mechanical and technological tests were carried out on the supplied material HT179. This material is further processed into a cartridge for an airbag deployment. During production many defects occurred, especially after cutting out the holes of deep-drawn product. The company established these defects as material property. Therefore it is necessary to evaluate the characteristics of different material sets.
|
|
| |
guest ::
